Metalworking Fluids & Ancillaries

Synthetic and Semi Synthetic Boron Free, Triazine Free, Phenol free, Formaldehyde free, Cutting Fluids. Containing no long chain Chlorinated Paraffin’s 

Description SPARTAN SUPERCUT   NEW PRODUCT

Order Ref No SPARTAN LU 221

A multi-functional semi-synthetic metal process fluid incorporating the latest non-staining performance additives to ensure complete multi-metal compatibility.

Classified as NON hazardous under the MSDS Regulations, and based upon synthetic and natural esters in order to provide excellent machining performance across a wide range of applications. Low foaming tendency allows for use in the most arduous modern day machining centres at a higher concentration level.

MORE

Description SPARCOOL BIO 10 EPBF

Order Ref No SPARTAN LU 314

Sparcool BIO 10 EPBF is truly an ‘all round’ water-mix metalworking fluid. Although not designed as an ‘extreme pressure’ type fluid it does provide machining capabilities way beyond those normally associated with fluids which do not contain EP additives. This therefore means that Sparcool BIO 10 EPBF is able to cope with materials with widely differing machining characteristics from cast iron through aluminium to stainless steel.

MORE                                                                          

Description SPARCOOL BIO  70 XAL

Order Ref No SPARTAN LU 330

A water-mix metalworking fluid designed for the dedicated machining of aluminium alloys.  Free from short chain Chlorinated Paraffin, Terazine free, Boron Free   The design approach taken has produced a product which is particularly suitable for the aerospace industry where ‘inter-granular corrosion’ is of concern, whilst providing a fluid which gives maximum protection from staining on high magnesium and copper alloyed materials.

MORE

 

Description SPARCOOL BIO  60 EPBF

Order Ref No SPARTAN LU 320

Sparcool BIO 60EP2BF is a boron free “higher oil content” Biostable water-mix metalworking fluid. It has been specially designed to incorporate the latest advances in additive technology. Although water based, Sparcool Bio 60EP2BF with its blend of surface active and hydrodynamic lubrication additives, provides a true alternative to the use of neat oils for deep hole boring  

MORE.

Description SPARCOOL M40 BFEP

Order Ref No SPARTAN LU 405

Sparcool M40 BFEP is able to deal easily with high chromium steels and nimonic alloys, as well as mild steel, and many operations where neat oils have traditionally been utilised. Sparcool M40 BFEP with its blend of surface active and hydrodynamic lubrication additives is suitable for use on more arduous machining operations such as drilling and tapping, in addition to general machining

MORE          .


Boron Free, Triazine Free, Phenol free, Formaldehyde free, Grinding Coolants                                                                                      Top of Page        

Description SPARGRIND COB

Order Ref No SPARTAN LU 177

SPARGRIND COB is the latest development in fluid technology designed to prevent cobalt leaching from materials alloyed with cobalt. Research has concluded that the cobalt leaches from these materials when in contact with the metalworking fluid by a reaction with the amino alcohol’s and other amine derivatives contained within the fluid . Spargind COB contains unique additives that prevent this reaction. 

MORE.

Description SPARGRIND LG

Order Ref No SPARTAN LU 305

Spargrind LG is a low oil semi-synthetic water-mix grinding fluid that forms a clear emulsion when diluted with water. It is designed predominantly for high stock removal grinding operations, and where a high surface finish is required.  Spargrind LG gives superior cooling and flushing characteristics, minimising the build up of ‘sticky’ residues, keeping grinding wheels ‘open’ and carrying debris away from the machining area .                                    

MORE.

Description SPARTAN SUPER SYN

Order Ref No SPARTAN LU 307

Sparcool Super Syn is a fully synthetic water-mix cutting and grinding fluid that forms a true solution when diluted with water, giving superior cooling and flushing characteristics, keeping grinding wheels “open” and carrying debris away from the machining area. Sparcool Super Syn provides excellent corrosion protection on both work piece and machines,  being boron free, it is particularly good at preventing the build up of “sticky residues”, normally associated with synthetic, boron containing fluids

MORE.

 

Drilling & Tapping                                                                                Top of Page

Description EASY TAP. Tapping Compound

Order Ref No SPARTAN LU 120

Easy Tap is a balanced blend of chlorinated, and sulphurised, extreme pressure lubricants combined with a solvent refined mineral oil. Easy Tap is excellent for drilling and tapping of all metals, including Stainless Steel, but may stain copper or its alloys. The Aerosol pack delivers the product as thick foam, which gives economy of use. Where this product is too heavy duty use Spartan easy Tap Light  

MORE.

Description EASY TAP LIGHT Tapping Compound

Order Ref No SPARTAN LU 121

Easy Tap Light is a balanced blend of chlorinated, extreme pressure lubricants combined with a solvent refined mineral oil. Ideal for drilling and tapping of all metals, where a clean finish is required. The Aerosol pack delivers the product as foam, which gives economy of use.                                                              

MORE.

Description SPARTAN RAPID TAP

Order Ref No SPARTAN LU 122

Rapid Tap is excellent for drilling and tapping of all metals, including Stainless Steel, but may stain copper or its alloys. Supplied in 4 x 5 Ltr Packs, the product can be used for many other operations, it is suitable as an additive to neat oils to extend their capability for more demanding tasks.                                           

MORE.


                                                                                    Top of Page

Drawing & Pressing

Description Tuff Cut

Order Ref Spartan LU205

A neat cutting and tapping oil based on high levels of chlorine and fatty additives. This treatment level makes TUFF CUT suitable for all but the most arduous of metal working operations. Freedom from sulphurised additives gives TUFF CUT almost zero odour even when machining at elevated temperatures. Suitable for cutting, threading, drilling and reaming in multispindle machines on ferrous and non-ferrous feed stock including stainless steel. 

MORE. 

Description CLEAN FORM

Order Ref No SPARTAN LU 125

Spartan Clean Form has been developed as a clean, non sticky, pressing and forming lubricant. It is particularly suited to high volume automatic operations. Clean Form provides effective lubrication and flash dries from hot components leaving no sticky residues. Stacked components do not stick and are easily handled. In addition the solvent component in the product provides an odourless degreasing capability. Spartan Clean Form has negligible corrosive action, and can be used in mild steel equipment.                      MORE.

Description HI-PRESS

Order Ref No SPARTAN LU 165

Hi-Press is a heavy duty sulfo chlorinate tapping, drawing and pressing lubricant developed to provide high performance with maximum protection for the tooling. Designed to minimise scuffing, Hi Press is ideal for heavy duty applications on either single or multi stage operations. For lighter operations, or to assist subsequent cleaning ,HI-Press can be thinned with a light mineral oil, or Spartan Sparsol-3.

MORE.

Description HI-PRESS 2

Order Ref No SPARTAN LU 170

Hi-Press-2 is a sulfo chlorinate tapping, drawing and pressing lubricant developed to provide high performance with maximum protection for the tooling. Designed to minimise scuffing. For very heavy applications use ,HI-Press                                               MORE.

Description COOL PRESS

Order Ref No SPARTAN LU 185

Spartan Cool-Press Has been developed to meet the needs of a comprehensive range of components typically found in the Automotive, Industrial, and Domestic markets. A mineral oil based product designed to reduce friction, and improve tool life. Cool-Press is particularly suited to automatic operations. And provides effective lubrication and short term inhibition for components. For greater economy this product can be diluted with a light hydraulic oil where the needs of the job require more lubricity.                       MORE.

Description SOL DRAW

Order Ref No SPARTAN LU 190

Sol-Draw is a water soluble heavy duty sulfo chlorinate tapping, drawing and pressing lubricant developed to provide high performance with maximum protection for the tooling. Designed to minimise scuffing, Sol-Draw is ideal for applications on either single or multi stage operations. MORE.

Ancillary Products

Description ANTI FOAM

Order Ref No SPARTAN NU 340

Anti foam is a silicone free product designed to control foaming is soft water areas. It is suitable for use in many applications including machine tool cutting fluids, paint spray booths, and detergent washing processes

More.  

Description BIO PURGE. Biocidal System Cleaner

Order Ref No SPARTAN BI 300

In order to achieve optimum performance, it is essential to clean and sanitise a machine tool prior to recharging with fresh Spar Cut, or Spar Grind. SPARTAN Bio Purge combines a Biocide package with a detergent to effectively clean and sanitise in one operation. It has been formulated to be added at around 1% directly to the old fluid, without affecting, or stopping the process.

More.

 Home         Top of Page