UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                            YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                    PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                        MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                        E-Mail   billeagleson@yahoo.co.uk

 E-MAIL   sales@spartanlubes.co.uk

 

 RUST GUARD LT

RP 810

 

Rust Guard LT is a solvent deposited water displacing wax film rust preventative. It is a very high solids product giving extended protection in difficult conditions.

Rust Guard LT Is suitable for use on all metals, and is particularly effective for medium to long term protection of components during storage or transit. It is also suitable for application to painted surfaces, although it is advisable to check compatibility with the paint prior to use

 

DIRECTIONS FOR USE.

Use as supplied by, brush, non misting spray, or immersion. Care should be taken in spray applications, as the heavy duty nature of the product may block spray jets. Drying time is approximately 40-50 minutes.

 

CHARACTERISTICS

Appearance                                                 Brown liquid

Solubility                                                     Insoluble in water

Specific Gravity                                            0.850

Flash point                                                  35c Abel Closed Cup.

Film thickness                                             2 microns

Coverage Rate                                             Dependant on method of application

 

HEALTH AND SAFETY INFORMATION

Safety Advice

Flammable Substance identification No 1993 do not breath spray. Avoid unnecessary or prolonged personal contact, Keep out of reach of children.Do not mix with other chemical products unless specifically directed.

 

First Aid

Wash splashes from the skin immediately with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, excessive levels of vapour, or if the product is swallowed.

 

Spillage's  Spillage's should be contained and absorbed with an inert mineral product.

 

Additional information  Do not spray onto hot surfaces, live electrical equipment, or naked flame

 

 

 Return