UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                            YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                    PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                        MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                        E-Mail   billeagleson@yahoo.co.uk

E-MAIL   sales@spartanlubes.co.uk



RP 805


Rust Guard MT is a solvent blend designed to effectively dewater, and provide a soft rust protective film. It is a high solids product containing a blend of lanolin grease and surface active dewatering and corrosion inhibiting agents dispersed in white spirit, and meets the composition and performance requirements of BS 1133 Section 6, and in reasonable conditions for indoor storage will give indefinite protection.

Rust Guard MT has a pleasant characteristic smell and is suitable for use on all metals. Care should be taken with some plastic and rubber materials.




Use as supplied by, brush, non misting spray, or immersion




Appearance                                                 Clear brown liquid

Solubility                                                     Insoluble in water

Specific Gravity                                            0.79

Flash point                                                  39c Abel Closed Cup.

Film thickness                                             0.0091mm

Coverage Rate                                             225 sq. meters per 5 ltrs

Corrosive action                                           None on metals but may effect some plastics or rubbers



Safety Advice

Flammable Substance identification No 1993 do not breath spray. Avoid unnecessary or prolonged personal contact, Keep out of reach of children.Do not mix with other chemical products unless specifically directed.

First Aid

Wash splashes from the skin immediately with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, excessive levels of vapour, or if the product is swallowed.

Spillage's  Spillage's should be contained and absorbed with an inert mineral product.


Additional information    Do not spray onto hot surfaces, live electrical equipment, or naked flame