UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                            YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                    PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                        MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                       E-Mail       billeaglesonyahoo.co.uk

 E-MAIL   sales@spartanlubes.co.uk



PF 800


Spartan Rust Ease is a medium flash point penetrating fluid combined with wetting agents, refined solvents, and mineral oils. The product evaporates slowly, allowing its special additives to penetrate into rusted joints and under jointing compound.


Spartan Rust Ease finds extensive use in the repair and reconditioning industry.




Rust Ease should be used as supplied. Apply by Aerosol, Brush, or use in a soak tank.




Appearance                                                 Clear light brown liquid.

Odour                                                         Faint paraffinic.

Specific Gravity                                            0.79

Corrosive action                                           Non Corrosive to normally encountered metals




Safety Advice

Caution Flammable liquid, use only as recommended, Keep out of reach of children.Do not mix with other chemical products unless specifically directed. Use in a well ventilated area.


First Aid 

Wash splashes from the skin with soap and water. Following eye contact flush thoroughly with water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.


Spillage's  Should be absorbed with mineral absorbent, and collected for disposal.


Additional Information. Aerosols and pressure containers: Protect from sunlight and do not expose to temperature exceeding 50 C. Do not pierce or burn even when empty, do not spray on a naked flame, or any incandescent material.