UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                             YOUR CONTACT BILL EAGLESON

PONTEFRACT WEST YORKSHIRE WF9 3DQ                                                                                                       PHONE/ FAX 01535 657621

TELEPHONE 07836 524794                                                                                                                                               MOBILE 07 774 480335

FAX 01977 640448                                                                                                                                                     E-Mail   billeagleson@yahoo.co.uk

E-MAIL sales@spartanlubes.co.uk



PS 820

SOLSTIP F is an acid activated solvent for paint stripping components by immersion. Formulated to strip the more difficult highly polymerised paint finishes. Designed for use in a tank with a water seal to minimise solvent evaporation, this product finds widespread applications in paint shops & the reconditioning industry. Suitable for use on all metals, other than Zinc alloys which will be slightly etched, and magnesium which will be more seriously attacked.



Use as supplied, in a well ventilated environment. Do not heat or agitate. Maintain a 2 water seal. P.V.D.F. tanks are recommended. Components should be immersed until the paint film has wrinkled or flaked. Time will vary according to the number of coats, and type of finish. After treatment components should be thoroughly rinsed preferably pressure rinsed, and neutralised by immersion in a 3 grams per Ltr Soak Clean MDA solution prior to final rinsing.



Appearance Clear pale yellow liquid

Odour           Sharp Acidic

Specific Gravity1.29

Corrosive actionWill etch zinc alloys and significantly corrode magnesium. Will  have an adverse effect on certain resin based, plastic, and                     rubber materials.

Flammability Non Flammable




Safety Advice Harmful Contains Dichloromethane substance I.D. No 2810. Harmful by inhalation Do not smoke when using. Wear suitable protective clothing Keep out of reach of children. Do not mix with other chemical products unless specifically directed.


First Aid Wash splashes from the skin with soap and water. If exposed to excessive levels of vapour, remove to the fresh air. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, excessive levels of vapour, or if the product is swallowed.  Spillage's Should be absorbed with mineral absorbent, and collected for disposal.


Additional information. Use in a well ventilated area, or employ rim exhaust ventilation system to prevent a build up of vapour.