UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 077 74 480335
FAX 01977 640448 E.Mail firstname.lastname@example.org
A neat cutting and tapping oil based on high levels of chlorine and fatty additives. This treatment level makes TUFF CUT suitable for all but the most arduous of metal working operations. Freedom from sulphurised additives gives TUFF CUT almost zero odour even when machining at elevated temperatures. Suitable for cutting, threading, drilling and reaming on ferrous and non-ferrous feed stock including stainless steel.
· Pale colour
· Low odour
· Extends tool life
· Improves finish
· Good flushing characteristics
· Suitable for ferrous and non-ferrous metals
Can be used via a recirculation system on automatic machines or by hand on smaller operations such as pipe threading.
HEALTH AND SAFETY INFORMATION
Safety Advice. For eye contact rinse immediately with plenty of water. Wear suitable protective clothing Keep out of reach of children. Do not mix with other chemical products unless specifically directed.
First Aid. Wash splashes from the skin with soap and water. If swallowed, DO NOT INDUCE VOMITING. Give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.
Spillage's should be absorbed with mineral absorbent, and collected for disposal