UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                            YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                    PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                        MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                       E-Mail             billeagleson@yahoo.co.uk

 E-MAIL   sales@spartanlubes.co.uk

Spartan Super Syn

LU 307

Boron Free, Triazine Free, Phenol free, Formaldehyde free, and Containing no long chain Chlorinated Paraffin’s, Sparcool Super Syn is one of the first of a new generation of boron free synthetic Biostable water-mix metalworking fluids. It has been specially designed to incorporate the latest advances in additive technology and thereby comply not only with current legislation, but also that pending. Sparcool Super Syn is a fully synthetic water-mix cutting and grinding fluid that forms a true solution when diluted with water, giving superior cooling and flushing characteristics, keeping grinding wheels “open” and carrying debris away from the machining area.

Sparcool Super Syn provides excellent corrosion protection on both work piece and machines, whilst  preventing the build up of “sticky residues”, normally associated with synthetic, boron containing fluids.


Appearance of Concentrate

Green Liquid

Specific Gravity @ 20oC


pH @ 5% (Distilled Water)


Anti-corrosion by IP287

2.5% Break Point

Reichert Load Bearing Characteristics

3.3 Kg/mm2

Refractometer Correction Factor



Application  Sparcool Super Syn should not be used at concentrations less than its specified break point. Maximum machining performance can be achieved at concentrations up to 8% however, the majority of operations will be completed with concentrations in the range 3 - 6%.


Boron Free and therefore prevents the formation of sticky residues. Possesses good wetting and cooling characteristics promoting freedom from wheel glazing when used for grinding. Copes with even the most arduous operations. Exceptionally long fluid life.  Low foaming characteristics. Rapid swarf separation. Does not emulsify machine lubricants. Excellent workpiece visibility

* Not being dedicated to any one material or machining process, care should be taken not to use Sparcool Syntech in situations where a dedicated fluid may provide overall better performance. The life and performance of any water-mix metalworking fluid is affected greatly by external factors such as water quality, atmospheric contamination and ingress of machine oils etc. Maximum benefit and lowest operating costs are achieved where correct monitoring and control is applied.

Home         Back to Coolants