UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                            YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                    PHONE/ FAX          01535 657621

TELEPHONE 07836 524794                                                                                                                                         MOBILE                     07 774 480335

FAX 01977 640448                                                                                                                                                        E-Mail  bill.eagleson@virgin.net

E-MAIL   sales@spartanlubes.co.uk

 

EASY TAP (LIGHT)

LU 121

Easy Tap is a balanced blend of chlorinated extreme pressure lubricants combined with a solvent refined mineral oil. Easy Tap  is excellent for drilling and tapping of all metals, including Stainless Steel. The Aerosol pack delivers the product as a foam which gives economy of use.  Whilst the loose product can be used for many other operations such as pressing and stamping. It is also suitable as an additive to neat oils to extend their capability for more demanding tasks.

 

FEATURES                                       BENEFITS

Contains E.P.Aditives                        Suitable for tough jobs

Viscous liquid                                    Sticks to the cutting tool

High Flash point                                 Not removed by the heat generated

 

DIRECTIONS FOR USE  Easy Tap should be used as supplied directly to the cutting tool.

 

CHARACTERISTICS

Appearance                        Clear Light brown liquid.

Odour                                 Characteristic sweet oily odour

Specific Gravity                    1.026

Viscosity                             41.5 Centipoise @ 20 C

Flammability                        Flash point above 250 C

Corrosive action                    Non Corrosive to normally encountered metals

Staining of Yellow Metals       Minimal

 

HEALTH AND SAFETY INFORMATION

Safety Advice Not classified as dangerous, however the following safe working practices are recommended. Avoid unnecessary or prolonged personal contact. Keep out of reach of children.Do not mix with other chemical products unless specifically directed.   First Aid Wash splashes from the skin with soap and water. Following eye contact flush thoroughly with water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed. 

Spillage's Should be absorbed with mineral absorbent, and collect for disposal.  Additional Information. Aerosols and pressure containers: Protect from sunlight and do not expose to temperature exceeding 50ēC. Do not pierce or burn even when empty, do not spray on a naked flame, or incandescent material.

 

 

 Home     Back to Coolants