UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 07 774 480335
FAX 01977 640448 E-Mail email@example.com
Easy Tap is a balanced blend of chlorinated extreme pressure lubricants combined with a solvent refined mineral oil. Easy Tap is excellent for drilling and tapping of all metals, including Stainless Steel. The Aerosol pack delivers the product as a foam which gives economy of use. Whilst the loose product can be used for many other operations such as pressing and stamping. It is also suitable as an additive to neat oils to extend their capability for more demanding tasks.
Contains E.P.Aditives Suitable for tough jobs
Viscous liquid Sticks to the cutting tool
High Flash point Not removed by the heat generated
DIRECTIONS FOR USE Easy Tap should be used as supplied directly to the cutting tool.
Appearance Clear dark brown liquid.
Odour Characteristic sweet oily odour
Specific Gravity 1.026
Viscosity 41.5 Centipoise @ 20 C
Flammability Flash point above 250 C
Corrosive action Non Corrosive to normally encountered metals
HEALTH AND SAFETY INFORMATION
Safety Advice Not classified as dangerous, however the following safe working practices are recommended. Avoid unnecessary or prolonged personal contact. Keep out of reach of children. Do not mix with other chemical products unless specifically directed. First Aid Wash splashes from the skin with soap and water. Following eye contact flush thoroughly with water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.
Spillage's Should be absorbed with mineral absorbent, and collect for disposal.
Additional Information. Aerosols and pressure containers: Protect from sunlight and do not expose to temperature exceeding 50ēC. Do not pierce or burn even when empty, do not spray on a naked flame, or incandescent material.