UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                         YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                 PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                     MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                    E.Mail     billeagleson@yahoo.co.uk

E-MAIL   sales@spartanlubes.co.uk

 

 

 COOL-PRESS

LU 185

 

Spartan Cool-Press Has been developed to meet the needs of a comprehensive range of components typically found in the Automotive, Industrial, and Domestic markets. A mineral oil based product designed to reduce friction, and improve tool life. Cool-Press is particularly suited to automatic operations. And provides effective lubrication and short-term inhibition for components. For greater economy this product can be diluted with light hydraulic oil where the needs of the job permit.

 

DIRECTIONS FOR USE

Use as supplied, ideally as a fine airless sprays direct to the point of operation, or by brush, swab, or roller.

 

CHARACTERISTICS

Appearance                                                                 Clear light brown liquid.

Odour                                                                            Mild

Specific Gravity                                                           0.914

Viscosity                                                                      118 c/s

Corrosive action                                                          Non-corrosive, but may have an adverse effect on certain sensitive                               plastic,  rubber,  or painted materials.

 

 

HEALTH AND SAFETY INFORMATION

Safety Advice  For eye contact rinse immediately with plenty of water. Wear suitable protective clothing Keep out of reach of children. Do not mix with other chemical products unless specifically directed.

First Aid Wash splashes from the skin with soap and water. If swallowed, DO NOT INDUCE VOMITING. Give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.

Spillage's Should be absorbed with mineral absorbent, and collected for disposal.

 

 Home    Back to Coolants