UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 077 74 480335
FAX 01977 640448 E.Mail firstname.lastname@example.org
Spartan Clean Form has been developed as a clean, non sticky, pressing and forming lubricant. It is particularly suited to high volume automatic operations. Clean Form provides effective lubrication and flash dries from hot components leaving no sticky residues. Stacked components do not stick and are easily handled. In addition the solvent component in the product provides an odourless degreasing capability. Spartan Clean Form has negligible corrosive action, and can be used in mild steel equipment.
Based on low toxicity low aromatic materials. Mild odour pleasant to use Flash dries to leave no sticky residues.
Solvent based formulation Removes oil and grease leaving clean, easy to handle components
Liquid Product Easily dispensed
DIRECTIONS FOR USE Use as supplied, ideally as a fine airless spray direct to the point of operation.
Appearance Clear, colourless liquid.
Specific Gravity 0.79
Corrosive action Non corrosive, but may have an adverse effect on certain sensitive plastic, rubber, or painted materials.
Flammability 54c (Pensky Marten Closed Cup)
Safety Advice Flammable 54C (PMCC)For eye contact rinse immediately with plenty of water. Wear suitable protective clothing Keep out of reach of children.Do not mix with other chemical products unless specifically directed.
First Aid Wash splashes from the skin with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.
Spillage's Should be absorbed with mineral absorbent, and collected for disposal.