UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                         YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                 PHONE/ FAX         01535 657621

TELEPHONE 07836 524794                                                                                                                                                     MOBILE                  07 774 480335

FAX 01977 640448                                                                                                                                                                    E.Mail     billeagleson@yahoo.co.uk

E-MAIL   sales@spartanlubes.co.uk



BI 300


Bio-Purge system cleaner is an emulsifiable machine degreasant and steriliser, suitable for use in both self contained and centralised systems. The products powerful blend of biocides is extremely effective against all biological fouling, including aerobic and anaerobic bacteria, yeast's, fungi, and bacterial slime. The detergents and solvents contained in the product clean away fatty accumulations and emulsify tramp oil.



Attacks and removes bacterial and fungal growths. Eliminates objectionable odours. Provides a pleasant odour promoting operator acceptability. Effectively removes oil and slime. Avoids production interruption, can be used during machining.



Dilute Bio-Purge System Cleaner at 2-3% in hot or cold water, depending on the degree of contamination, and add directly to the drained machine.  For machines in use, add 1-2% of Bio-Purge directly into the emulsion 24/48 hours prior to draining. On completion of the cleansing period, remove the coolant/machine cleaner and flush with clean water, before refilling with fresh Sparcut Coolant.



Appearance                        Deep amber fluid.

Odour                                 Pine

Specific Gravity                   0.89

pH @ 2%                            9.8

Flash Point (P.M.C.F.)         39 c



Safety Advice. Not classified as dangerous, however the following safe working practices are recommended. Avoid unnecessary or prolonged personal contact Keep out of reach of children.

First Aid. Wash splashes from the skin with soap and water. Following eye contact flush thoroughly with water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.

Spillage's Small spillage's may be flushed to the foul sewer with plenty of water. Larger spillage's should be absorbed with mineral absorbent, and collected for disposal.



  Home    Back to Coolants