UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 07 774 480335
FAX 01977 640448 E-Mail email@example.com
Lectrosolv has been developed as an electrical equipment cleaner to replace products containing Trichloroethane 1.1.1. It is ideal for the efficient removal of stains, coatings, printing inks or deposits of oil, grease, and dirt. The product is of low toxicity, leaves no residues, and does not cause corrosion of metals. It is safe to use on most plastics or fibres, and quickly evaporates. Lectrosolv is suitable for cleaning most electrical apparatus, installations, and delicate instruments, leaving no residue.
Based on low toxicity low aromatic materials. Mild odour pleasant to use
Flash dries to leave no residues Clean, easy to handle components
Safe Solvent based formulation Removes oil, grease from components
Liquid Product Easily dispensed
DIRECTIONS FOR USE. Use as supplied, ideally as a fine airless spray direct to the point of operation, for large areas can be used in a hand wipe operation.
Appearance Clear, colourless liquid.
Corrosive action Non-corrosive to all metals, and will not effect inorganic zinc coatings, Phenolic, or vinyl coatings
Flammability 18 C
HEALTH AND SAFETY INFORMATION
Safety Advice. Flammable 18C. For eye contact rinse immediately with plenty of water. Wear suitable protective clothing Keep out of reach of children. Do not mix with other chemical products unless specifically directed. First Aid. Wash splashes from the skin with soap and water. If swallowed, DO NOT INDUCE VOMITING. Give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed. Spillage’s Should be absorbed with mineral absorbent, and collect for disposal.