UNIT 1. 45 INGS WALK SOUTH KIRKBY                                                                                                                                        YOUR CONTACT  BILL EAGLESON

PONTEFRACT  WEST YORKSHIRE WF9 3DQ                                                                                                                               PHONE/ FAX     01535 657621

TELEPHONE 07836 524794                                                                                                                                                                    MOBILE             077 74 480335

FAX 01977 640448                                                                                                                                                                                   E-Mail   billeagleson@yahoo.co.uk

E-MAIL  sales@spartanlubes.co.uk



 AC 200


Phoscoat is a concentrated blend of phosphoric acid, detergents, and wetting agents. It is non fuming and less aggressive than many other mineral acids, but will effectively remove scale, rust, and metal tarnish. The detergents contained in Phoscoat enable penetration and removal of deposits which are normally resistant to acid cleaning. Treatment of ferrous metals results in a phosphate conversion coat which inhibits rusting, and improves subsequent paint adhesion. Phoscoat is an excellent deruster, and will brighten aluminium and chrome. It is effective against many forms of hard water scale, including Beer and Milk stone, starch, protein, and soap containing deposits. Safe for use on all metals, and other hard surfaces including wood plastic, vitreous china, ceramic tiled, and painted surfaces.


FEATURES                                              BENEFITS

Based on Phosphoric Acid                       Rapidly removes rust and water scale suitable for use on stainless steel.

                                                                  Non fuming, inhibits rusting, and improves paint  adhesion.

Contains wetting agents                           Penetrates greasy deposits and rinses freely. Provides a foam blanket to minimise fumes.


DIRECTIONS FOR USE  Effective use concentration and times will depend on the degree of scale. Hot Phoscoat solutions will generate acid fumes which may cause corrosion of sensitive materials in the vicinity. Site tank, or ventilate tank area to avoid this. For corrosion inhibition of ferrous metals, after cleaning and derusting, rinse in a solution of 1 part Phoscoat to 25 parts water heated to 85c, or treat immediately with a suitable rust protective from the Spartan Rust guard range



Appearance                                               Clear liquid.

Odour                                                        Mild

pH of use solution                                     1

Use concentration                                     Diluted with up to 10 parts water.

Corrosive action                                        Will slowly corrode most metals and adversely affect Nylon and textile fibres.

Flammability                                              Non Flammable



Safety Advice Corrosive contains Phosphoric acid (50%), Substance identification No 1760 Causes burns. Wear suitable protective clothing. Use in well ventilated areas. Keep out of reach of children.Do not mix with other chemical products unless specifically directed.   First Aid Wash splashes from the skin immediately with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink, Medical attention is recommended following eye contact, or if the product is swallowed.  Spillage's Small spillage' s can be flushed to the foul sewer with plenty of water large amounts should be contained and absorbed with an inert mineral product


Home    Back to Descale