UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 077 74 480335
FAX 01977 640448 E-Mail firstname.lastname@example.org
Derust-3 is a concentrated blend of phosphoric and hydrochloric acid, detergents, and wetting agents. It is non fuming and less aggressive than many other mineral acids, but will effectively remove scale, rust, and metal tarnish. The detergents contained in Derust-3 enable penetration and removal of deposits which are normally resistant to acid cleaning. Derust-3 is an excellent deruster, It is effective against many forms of hard water scale, including Beer and Milk stone, starch, protein, and soap containing deposits.
Based on Phosphoric Acid Rapidly removes rust and water scale suitable for use on stainless steel.
Non fuming, inhibits rusting, and improves paint adhesion.
Contains wetting agents Penetrates greasy deposits and rinses freely. Provides a foam blanket to minimise fumes.
DIRECTIONS FOR USE Effective use concentration and times will depend on the degree of scale ventilate tank area to avoid this. For corrosion inhibition of ferrous metals, after cleaning and de rusting, treat immediately with a suitable rust protective from the Spartan Rust Guard range
Appearance Clear liquid.
pH of use solution 1
Use concentration Diluted with up to 10 parts water.
Corrosive action Will slowly corrode most metals and adversely affect Nylon and Textile fibres.
Flammability Non Flammable
HEALTH AND SAFETY INFORMATION
Safety Advice Corrosive contains Phosphoric acid (<50%), and Hydrochloric acid <10%. Causes burns. Wear suitable protective clothing. Use in well ventilated areas. Keep out of reach of children. Do+ not mix with other chemical products unless specifically directed.
First Aid Wash splashes from the skin immediately with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink, Medical attention is recommended following eye contact, or if the product is swallowed.
Spillage's Small spillage' s can be flushed to the foul sewer with plenty of water large amounts should be contained and absorbed with an inert mineral product