UNIT 1. 45 INGS WALK SOUTH KIRKBY YOUR CONTACT BILL EAGLESON
PONTEFRACT WEST YORKSHIRE WF9 3DQ PHONE/ FAX 01535 657621
TELEPHONE 07836 524794 MOBILE 07 774 480335
FAX 01977 640448 E-Mail firstname.lastname@example.org
A blend of mineral acids, wetting agents, and soil suspending additives, Alum-brite is a highly effective acid cleaner for the removal of oxidisation and tarnishing on aluminium. Suitable for alloy wheels truck bodies, and machined parts.
Highly active. Economical dilution
Fast acting Saves time
Biodegradable No disposal Problem
Removes oxidisation Leaves a clean bright finish
DIRECTIONS FOR USE. Must be diluted with water before use. 1:15 for light soiling. 1:8 For Medium Soiling., and 1:4 for heavy soiling. Brush or trigger spray onto the surface to be cleaned, from the bottom working upwards. Agitate with a brush where necessary and rinse with clean water. Contact time depends on degree of contamination. Some types of finishes i.e. anodised or varnished aluminium are not suitable for treatment with this product. Always test on a small area first.
Appearance Clear liquid.
Specific gravity 1.01
Boiling Point above 100c
Flammability Non Flammable
HEALTH AND SAFETY INFORMATION Toxic and corrosive. Harmful by inhalation, do not smoke when using, For skin contact wash under running water for at least 30 mins.. For eye contact rinse immediately with plenty of water for at least 15 mins, and seek urgent medical attention.. Wear suitable protective clothing Keep out of reach of children. Do not mix with other chemical products unless specifically directed.
First Aid Wash splashes from the skin with soap and water. If swallowed, DO NOT INDUCE VOMITING. give water to drink. Medical attention is recommended following eye contact, or if the product is swallowed.
Spillage's Ventilate the area to disperse vapours. Small spillage's will evaporate rapidly, large amounts should be absorbed with mineral absorbent, and collected for disposal.